Zinc Cut Wire Shots

  • Zinc Cut Wire Shots
  • Zinc Cut Wire Shots
  • Zinc Cut Wire Shots
Zinc Cut Wire ShotsZinc Cut Wire ShotsZinc Cut Wire Shots

Zinc Cut Wire Shots

  • Place Of Origin: China
  • Shape: As Cut & Conditioned
  • Material: Zinc
  • Application: Shot Blasting & Peening
  • Description: A a leading manufacturer & exporter of cut wire shots in China, KHOLEE BLAST provides Zinc Cut Wire Shots as cut & conditioned at good quality with best price. Wholesale.
  • INQUIRY   EMAIL

Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashing of non ferrous components. Zinc Cut Wire is also available in a conditioned form which is used as a longer lasting alternative to cast zinc shot.

Applications

Deburring and deflashing of aluminium and zinc castings and die-castings. Removal of sand from sand castings. Removal of parting lines and stains from non ferrous castings. Removal of water wrinkle from aluminium die castings and providing a luster satin type finish. Zinc Cut Wire provides temporary corrosion protection to ferrous parts blasted with it. A very thin layer, up to 1.3μm thick is deposited onto the surface of the part.

Properties of Zinc Cut Wire Shots

Chemical Composition

Zinc Shots - Zn, purity 99.9%, Fe0.004%, Al0.003%, Cd0.002%, Cu0.001%

Available Sizes

Micro Hardness

Grain number — Size in mm

Zinc Shots As Cut: / 0.8mm / 1.0mm / 1.5mm

/ 2.0mm / 2.5mm

Zinc Shots Conditioned: 0.6mm / 0.7mm / 0.8mm

/ 1.0mm / 1.5mm / 2.0mm / 2.5mm

Other grades are available on request

Zinc Shots As Cut: 35~55 HV

Zinc Shots Conditioned: 45~60 HV

Tensile Strength

Ervin Recycle

90 ~ 120 Mpa

6000 times

Shape

Metallurgical Microstructure

As Cut: cylindrical

Conditioned: Rounded

Deformed α

Density

Package

Specific gravity approx. 7.1g/cm3

Bulk density 4.2 kg/dm3

25 kg bags on pallet up to 1 ton

1 ton loose in big bag



Inquiry: